Please visit our home site at www.TRILOBOATS.com.

Anke and I live aboard WAYWARD, and wrote about it's design and construction at ABargeInTheMaking.blogspot.com.

Access to the net comes and goes, so I'll be writing in fits and spurts.Please feel free to browse the archives, leave comments where you will and write... I'll respond as I can.

Fair winds!

Dave and Anke
triloboats swirly gmail daughter com

Tuesday, January 20, 2015

The LAW: Is we IN or Is we OUT?

The now Outlawed liveaboard community of Eagle Harbor
where we got our start


Sitting still,
Doing nothing,
The Law grows by itself.
-- Apologies to Taoist Poetry

They civilize left,
They civilize right.
'Til nothing is left,
'Til nothing is right!
They civilize freedom 'til nothing is free...
-- From Paint Your Wagon, The First Thing Ya Know


The LAW: Is we IN or Is we OUT?
(Caution: Rant Alert)

One of the disturbing trends visibly unfolding over the span of my lifetime is loss the Commons.

It's a general loss, but at the moment, I'm thinking of lost freedom of the seas. That, and the conversion of Citizens into Outlaws; not by any sudden turn to crime, but overtaken by the rising tide of Law.

To go swimming - skinny or clad - at one's own risk. To imbibe while safely at rest. To mix it up in one's own bedroom with whichever adult consents to play. To let go of one's own life at a time of one's own choosing.

All of these and others - to some extent or another, from place to place - lie outside the Law. Prohibitions have long been in place, and yet stand, despite some encouraging softening of the Law or its enforcement.

Freedom to come and go - or abide - as one pleases. To sit on a side-walk or linger in conversations among friends or drop one's hook outside a marked channel.

These are freedoms drowning in that steadily rising tide.

*****

I first got into sailing toward the end of the early revival in blue-water cruising.

Quasi-Hippie cruisers set forth in funky, home-built boats to rediscover the world. Moitessier, Jones, Pardeys, Hills and many others blazed a trail. But on their heels came the droves of 'turn-key' boats with their crews of well-heeled, extra-curricular tourists.

We on the low road get caught in a squeeze play.

Rising regulation of anchorages - anchoring, moorage and entry fees, permits, registrations, and outright prohibitions -  has been squeezing us from shoreside. From the water, our factory outfitted, proper-yachtie neighbors pay these fees without flinching, then add their voices in condemnation.

Consider the word, derelict. Here's a list of meanings in order acquired:
  • Abandoned
  • In poor condition due to neglect or abuse
  • Shamefully negligent in not having done what one should have done
  • A person without a home, job, or property
Is it me, or is there 'mission creep' in play?

This word once usefully distinguished abandoned, hazard-to-navigation watercraft from those in hand. Haul 'em away, auction or crush 'em, and good riddance.

The next level drops the notion of use... 'poor condition' is now a matter of judgement. Um... well, authorized and trained inspectors condemn structures on the basis of fair, sound, objective evaluations, right? If you happen to be living in hazard, we're saving you from yourself.

Shameful? Should? Now we're getting personal! The Puritans are on the warpath. And they have no qualms about codifying such BS into law that applies to us all, regardless of Constitutional principle.

A person without...??? Wait a minute... weren't we disposing of derelicts a few rounds back???

So what (or who) is a derelict? Anyone who offends the 'community norms'. And these have such a fine track record of  liberty and justice for all.

Might as well say undesirable and get it over with (What? They did??).

*****

Arguments Against Derelicts

 "If everyone were doing it, then..." aka "If we let you, then we'd have to let everyone!"

Probably the most common 'argument' put forward. It's a flat assertion of opinion masked as 'logic'.

First, it's ridiculous to think that many, much less everyone, might be tempted into doing 'it'.

The liveaboard life isn't exactly most folks cup o' tea. There's a lot of work involved. Space is small, both physically and socially. Boats rock and take on water from time to time. Anchors drag.

Second, the 'whatever' at the end of those ellipses is usually just as fantastic.

The harbor/harbors/world would be wall-to-wall boats. The water would turn to sludge. The fish will be caught and eaten by - Lawd forbid - derelicts!

So, let's remove that 'd'... the Law forbids.


"You're parasites are living for free on the backs of the rest of us!" aka "You're part of Entitlement Culture!"

Umm. Not exactly.

In most of the communities where fees are charged, boats at anchor are the only ones paying for zero services... doesn't cost the community a dime. Our use of shoreside infrastructure is charged separately. Our pockets are robbed with 'liveaboard fees' to cover dockside services bought and paid for.

Our expenditures ashore enrich your local economy, and incur local sales taxes... this of course makes us taxpayers within your community. Meanwhile, we often contract for jobs ashore, to earn the money we're spending. Volunteer in community organizations or projects.

Meanwhile, a liveaboard presence provides services without charge. We hop to, to pump or secure a vessel in trouble (most often one of yours). We rescue you and your frightened children when you dump your canoes.

No, we pay our way as we go, trading an honest hour for an honest wage.

It is you, I would say, who are not entitled to profit from those for whom you've done nothing, for use of an  anchorage which predates your community.


"Well, you're squatters, then, squatting on Public Land!"

These 'lands' (sea floor) were considered open to Public Access, and guaranteed under maritime Law, until they were appropriated by state and local governments for 'regulation and revenue'. Heavy on the revenue. Stands until challenged in court, however.

Without changing the Law of precedence - which remains US Maritime Law - to assert that anchoring in Public Waters constitutes squatting and that liveaboards are therefore squatters... well... that's called libel (I have nothing against squatters, or even being one, but its intent is libel when so used).

'Course, it takes a legal team to defend oneself against that, and them in the big houses got 'em.


"Liveaboards pollute our pristine waters!"

This is a good one.

Liveaboards are subject to the same discharge Laws that regulate all vessels. They are generally obeyed, and where not, are subject to enforcement.

Meanwhile, those 'pristine waters'? One harbor was only beginning to recover from pollution from the Creosote factory that had enriched the town for a near century... other towns have similar polluters who are currently not only permitted, but wooed, encouraged and embraced.

How is it that the Environmental Impact Statement for mines, clearcuts, factories, quarries, roads, docks and so on consistently state 'no significant environmental impact', while liveaboards constitute an environmental crisis?

Road and sewer run-off, sewage discharge from 'treatment plants' (ever visit one?); the pump-out of oily bilges from recreational craft (whose numbers dwarf us); that mega-yacht soaping off its topsides (more 'grey-water discharge' per yacht than the whole liveaboard fleet could potentially emit in a year); ditto any fishing fleet present. And airborne emissions? Don't get me started.

All these slide by without comment. "But last week I saw that bum scrape his plate overboard!"

I agree that liveaboards participate in pollution to a degree. But given our generally low-consumption lifestyle, I find it hard to buy that our homes are worse polluters - even per capita - than those with much larger, highly complex and over furnished homes plus their bevy of high-polluting tools and toys.

Comparing tiny liveaboard communities head to head with sprawling shoreside communities, what are we to conclude?


"Bunch'a eyesores!" or "The derelicts in our viewshed detract from property values."

I respect my neighbor's right to their own aesthetics.

When they wish to replace a beautiful stretch of shoreline with an ugly box, chosen from a catalog and built by the lowest bidder, litter their lawns with plastic furniture... I don't complain. If it's bad enough, I'll move on.

So I really don't think we should be passing Law to outlaw - or at least harass - a high-priced dive.


*****

Okay. You get the picture.

These folks aren't particularly monstrous. They tend to oppose government regulation, Big Brother, infringement of personal and communal freedoms. They just don't connect the dots across the water.

Point is, the Law is on the move. Sitting quietly at anchor, we are perfectly legal one day, owing cash money to grubbers the next, and quite possibly hustled along by threat of force the day after.

It's kind of pathetic.

We toe the line. We comply with the Law, both its letter and - more than many - its spirit. We're respectful of person and property. We consume little and contribute much. Like any other community, all this in-the-main.

Yet, one day, we find ourselves 'derelict'... Outlaw...

...and it's time to move along, over that shrinking horizon.



PS. I've used 'us' and 'them' language throughout. However, some of our liveaboard friends -as in any other community - have been poor neighbors. At the same time many among the shoreside communities have stood up for liveaboards at some cost to themselves. To you, I offer my heartfelt thanks!

PSS. The long-running trend to criminalize abortion is part of this rising tide. Roughly one million women per year are in danger of being convicted of  murderer, and all who assist them in any way of murder or accessory to murder. Chances are excellent that each and every one of us is guilty, or loves someone who is. There's no moving along from this one.

Sunday, January 11, 2015

Copper Plating a Plywood Hull

Copper Bright on Launch Day
(high blocked for trailer)



A penny for your thoughts?

Copper Plating a Plywood Hull: What I Know and Don't

Near the beginning of our journey, a then 125 year old schooner hauled out near us.

It had been coppered with 1/16in strips, nailed over Irish Felt (no extra tar), and was just now starting to 'perish' (worn to holes). Never recaulked in all that time, and the owners were apprehensive about what they might find.

As the copper and felt were pulled away, a like new, DRY bottom was revealed!

Local caulkers (pronounced 'corkers' out here) pulled some cotton (and oakum?) and said it didn't need reworking! No one could tell if it had been initially oiled (no paint), so they went for it this time round (don't remember the oil), new felt and copper, and away they sailed.

Leaving us VERY impressed greenhorns in their wake.

Inspired, and guided by clues (mostly) from WoodenBoat Magazine articles, we're now copper plating our third hull. At this writing, LUNA is seventeen years old, and SLACKTIDE six -both rode hard for much of their lives... they and their copper in good shape.

Now, so far as I know, we're the only ones who've tried coppering with either plate or foil on plywood - would love to hear of other experiences!

Here's what we've learned, induced, guessed and gone for... everything I know (or don't) about it all.


The Pitch

  • Copper provides wood borer protection, non-toxic anti-fouling, and vastly reduces the work involved.
  • Plate copper provides great mechanical protection when grounding (by choice or not).
  • It provides ballast, as low as possible in the hull, proper.
  • It's high on the galvanic scale, so you need fear no "hot" neighbor. If your motor lifts out, you are mono-galvanic (copper and bronze) below the waterline, so no zincs.
  • It dissipates a lightning strike when bonded to your protection system.


The Price

Copper is initially expensive.

We tell ourselves that it's cheaper by weight than good cuts of meat, a gallon of diesel, a Big Mac. Most times it is. But it still staggers us when we go to pay for it.

But...

  • The initial outlay is offset by savings on ballast, and costs of alternatives
  • It pays for itself quickly; in haul-out avoidance (haul-out, yard fees, paint, brushes and such, treats = $$).
  • It pays for itself slowly; longevity makes for a long, profitable payout.
  • It's ability to protect the hull constitutes fantastic, on-board insurance.
  • It's a commodity metal, with market value. Unlike most construction materials, it can be cashed in for a good chunk of your initial outlay. If prices rise, you may actually profit. It's incognito and off the radar of (most all?) would-be thieves.
  • It adds value at resale, not only for its virtues... but with a certain cachet.


Copper (Cu)

Construction (Roofing) Copper - Any copper with a minimum copper content of 99.5% to be used in building construction. Copper has been valued for centuries as a roofing material, for its aesthetically pleasing green patina that forms over time. It is also very economical, as many copper roofs have lasted up to 100 years and it is 100% recyclable. The roofing copper specification, ASTM B370 allows a slightly broader chemistry than does ASTM B152. Copper sheet 10 oz through 48 oz in our inventory is referred to as roofing copper.   -- Alaskan Copper and Brass Company (Seattle)
 
Copper sheathing's primary purpose is to counter wood-borers, followed closely by anti-fouling.

Elemental copper (I've read) is non-toxic, repelling growth with its intrinsic electrical field. Cu2O (cuprous oxide), the active ingredient in 'copper' bottom paints, is toxic and reddish in color. We do develop Cu2O along the waterline, under greenish patina, but light scrubbing (my favorite) won't expose it.

Borers are kept at bay by the presence of copper. It's inboard face is as potent as outboard, if not more so.

Anti-fouling is less than most paints, but keeps growth down to a light slime, during the year. We scrub the slime away two or three times a year, at about 15 minutes per side. Or, we hang out in fresh water for a few days to kill it, and it sloughs off when we get under way.

We experience zero growth under the chines (at least on our square boat hulls). It's possible that the combination of copper stress and low light exceed a threshold of viability. This saves immense effort in scrubbing the awkward under-hull, and limits area to mere hull sides!

Copper is high on the galvanic series. The higher on the series, the less a metal has to worry about electrolytic degradation. Galvanicly similar metals, such as silicon bronze and some alloys of stainless steel react negligibly with copper, so are used as fasteners.

Like any material, copper erodes over time through mechanical or galvanic processes. Longevity is hard to predict. I've heard predictions that seem remarkably short, but have witnessed lifespans ranging from impressive to phenomenal (as in that schooner's case).

Longevity will be proportional to initial thickness. After that, such factors as time spent at rest vs underway, oxidation, groundings, mechanical scrubbing, growth quantity and type, electrical environment and... juju? I've heard a lot of theories!  8)  I'm sure there's some expert opinion out there.

Copper is milled in differing tempers. We've used a temper referred to as 'half-hard' as a balance between the need to bend and work it against it's mechanical durability. I haven't been able to confirm that this is a well-advised choice, in part because our application is virtually unheard-of.

I've read that CuNi (copper-nickle alloy) is preferred for marine use as having better mechanical properties, is even less prone to electrolytic degradation, and stronger anti-fouling. Internet searches pop up hulls built of the stuff. More expensive, but something to consider.

Copper-Nickel alloys are recognized primarily for their ability to withstand seawater corrosion, erosion and biofouling and therefore are widely used in marine and offshore industries.

C70600 - (90-10) Copper-Nickel is widely used in marine applications where resistance to both corrosion and biofouling is important.  -- ibid


Foil and Plate Sheathing

Hulls are sheathed with thick-ish foil or thin-ish plate.

Very Curvy Dogs tend to foil or very thin plate - generally in diagonal strips (possibly spiled like planks), fastened along their overlapped, longitudinal edges - which can follow their voluptuous forms. Strips are laid from aft forward for streamlined laps, and may change pattern at various points for ease or appearance.

Plywood and plate are both sheet materials, so both assume what is called a 'developed' shape (don't ask). This means that the plate can be much thicker and wider -up to uncut full-size - and still conform to the hull. Beyond a certain point, laps may be forsaken for butts (edges pressed tight, each against the next).

Triloboats - being based on sheet dimensions - plate up with the same ease they plank up.


Fasteners

Foil, and perhaps thin plate is usually fastened with bronze ring-shank (annular ring) nails.

Plate can be nailed or screwed. Either can have their heads countersunk to flush with the plate surface, which smooths water flow, and protects the heads from grinding when taking the ground.

We prefer wood screws for ease of repair/replacement.

Transverse edges are fastened every six inches, and about every foot mid-sheet. Along the chines, we use heavier fasteners passing through bronze angle (see below) and plate, fastening and linking them.

My thinking is that there is relatively little stress in tension (force pulling a fastener directly out of the wood). It would be greatest on the bottom while afloat... weight alone is roughly sheet weight divided by number of fasteners. Some suction forces are likely present, but have never seemed to amount to anything significant.

Our present (most sparse) pattern averages less than three pounds per mid-plate screw in tension.

Thus, we tend toward shorter fasteners, than not, with a preference for about 3/4in (18mm) minimum. We have used much shorter ones on the sides, into 1/2in (12mm) ply. We avoid poking through.

While I've not seen evidence of it, I suspect that (bottom) fasteners could undergo more stress in sheer. Therefore, we tend toward thicker fasteners than not. Shouldered wood screws make the most of the fastener where it passes through copper.


Underlayment

What to put between copper and wood?

The purpose of underlayment is to... um. Lotta factoids floating around out there.

As copper protects the wood from borers, and seawater is itself preservative, I'm not totally convinced that any underlayment is necessary. However, given the dry hull of that ol' coppered beauty, it's a property to shoot for. The underlayment, must, in this case, seal the fasteners, and isolate wood from seawater.

A survey of articles from WoodenBoatMagazine (as I recall... it's been a while), some paint or oil the wood. Some don't. Red lead and creosote (both currently illegal, most places) were 'common' (meaning at least two cases reporting). It's remarkable that, despite a wide range of approaches, all report success. Pretty forgiving.

Some tar the wood (with asphalt based roofing tars, mostly), and maybe more.

Irish Felt (tar impregnated wool felt) is often used, with or without extra tar. This is my personal first choice, but has become rare and is not always in economic reach. My guess is that any solvent resistant fabric and tar would do reasonably well.

We've used a thick layer of PolyUrethane adhesive on the ply to form a gasket. PU is elastomeric, which appeals to me, waterproof, and cheap in bulk tubs (sometimes sold as sub-floor adhesive). This is currently my second choice.

Presently, we're trying GRACE brand adhesive roofing underlayment - a rubberized asphalt product. It's used around here for bedding hardware or deadwood and the like. Unfortunately, we're having (minor) adhesion issues. I'm hoping warmer weather will improve its grip. Stay tuned for results.

I'm unsure whether our waterproofing efforts have been successful. Every boat has slowly settled. Whether that's 'middle aged spread' to which live-aboards are prone, or the slow absorption of 'water ballast' is unclear. Never had to rip into one of our bottoms, so it remains a mystery.

My guess is that we are absorbing water, which does not appear to be a problem. One approach might be to design for a saturated bottom, anticipating the weight as water-ballast.



Copper/Angle Schemes for Square and Deadrise Ply Hulls
Underlayments not shown

Angle

Where plates come together along chines, their butt is exposed to trouble. They can be covered with protective angle.

Right angle chines (square boats forever!) can use heavy, 90deg bronze angle (L-section lengths of bronze metal). This is great for withstanding heavy grounding stresses. For example, sweeping across the bottom while settling or lifting, one can encounter a salient rock with a lot of force. Nice to know that heavy metal is on task!

In the above diagram, a scheme for right-angle protection of the edges of a ply grounding plate is shown. The lower reaches of deadrise are still vulnerable, but not so much as they might have been without the salient plate and angle.

Other angles may have to make do with a strip of copper, creased along the mid-line, to span the gap.

Either may be darted to help conform to a curved chine. A good machine shop can roll angle to spec (well done, it's a beautiful thang!).

They may be bedded in tar or PU to fill any voids on the concave side.

We like heavy screws to fasten angle, alternating side and bottom, about every 6 to 9in (150 to 225mm).


Stress and Scantlings

Bottom stresses will vary with Pounds per Square Inch involved (or their equivalent).

A bigger boat will generate higher PSIs, all things being equal.

A rockered bottom will generate higher point loading, when grounded, along its transverse line (band, really) of contact with the ground. The more the rocker, the narrower the band and the higher the PSIs.

A deadflat, tends to spread the load across its whole area. The bigger the deadflat, the lower the PSIs.

Transitional bottom (up-curving toward the ends or transverse deadrise) are exposed to rocks toward their lower areas. Increasing angle, however, will decrease PSIs.

It's when we settle down on a tall standing, pointy rock that PSIs skyrocket. Especially if we're whumping up and down on one in the surf. Our best laid plans often expose our bottom to such high stress point-loading. Scantlings had best cover this eventuality.

Given that (with one truly exceptional situation) our plate has shrugged it off, I suspect that the following is more than adequate:
LUNA (5 ton, high rocker bottom at 1/4in (6mm) amidships and 1/8in (3mm) toward the ends)... the 1/4 now seems excessive, though doesn't hurt more than wallet and waterline.
SLACKTIDE (4 ton, deadflat bottom at 3/32in (about 4.5mm))
I've come to prefer 1/8in (3mm) for these sized cruisers in general, but economics have led us to round down.

So far, even the thin end of the range has stood up well to hard groundings. It seems that, if it's solidly backed by ply, it's pretty durn tough. If the ply crushes (can happen), the copper will deform, but has never yet holed. In fact, there are very few scratches, even after years.

We've used 1/16in (1.5mm) plate for our (vertical) sides, with full satisfaction.

Screws we (now) use are #6 x 1in (25mm) for sides and bottom, and #14 x 2in (50mm) for angle.

*****

LUNA and SLACKTIDE's copper has held up over years and through hard use.

We 'take the ground' often in an area short on sand. Even the best beaches usually have some of the planet protruding. We sail year round, in a place where weather can get uppity. We like to run the fringes where the charts are, charitably speaking, approximate.

Copper plate has our back... er... bottom!




PS. We've also used so-called copperpoxies - both DIY and commercial - in which powdered, elemental copper is mixed with epoxy and applied thickly to the hull. Once cured, the surface is intermittently sanded to expose fresh copper particles.

Our experience has been positive, but not in the same ballpark as sheet copper.

It is fairly expensive, and nasty as any epoxy. Sanding  is unpleasant and difficult with plastic residue, especially after the first time. It's anti-fouling properties are far less than foil or plate - or even standard anti-fouling - and require considerably more elbow grease. It's longevity and mechanical protection are much less than copper.

Where copper sheathing has eliminated under-the-hull growth, copperpoxies do not.

Still, it's initially cheaper than copper, lighter, consistent with hull encapsulation, and outlasts most anti-fouling paints. Once cured (and between sandings), it's non-toxic. It can stand extended haul-out, unlike some paints.

We'd still consider it for dinghies and camper cruisers.


PSS. On SLACKTIDE, we tried gluing the plates on with PU, but it was a fiasco (story quoted here from correspondence with a friend considering epoxy):
RE epoxied copper - I'd be apprehensive about expansion differentials stressing the bond. Not so much while immersed, but once dried out, especially in hot weather. But then, I've grown paranoid.

I don't know if you heard about our fiasco gluing copper w/ polyurethane (on theory that elastomeric bond would be preferable)? Did great, both on tests and while dry. But once launched, virtually every plate failed. Lots of oxide intrusion patterns from the edges on those that were still partially adhered.

Almost lost one, but mechanical fasteners along the chines saved the day. Ended up nailing (bleah!) over the PU 'gasket' (original glue, which remained firmly adhered to the ply).

My hypothesis is that minute intrusion at the edges oxidized the copper, which voided the bond and advanced the leading edge for another round. All in all, it went quickly. Possibly some chemical interaction among copper, salt and PU ingredients?

We did not, however, acid wash our plate. It came protected with a 'mill oil' film, and was 'new penny' bright, We washed with acetone before gluing (best guess at the time, no precedents I could find). We'd certainly acid wash if trying again. While dry adhesion was excellent, it's possible an oxide film allowed the initial edge-failures.

Saturday, January 10, 2015

Easy vs Ease vs Opportune




When I works... I works hard.
When I sits... I sits loose.
When I thinks... I falls asleep.


Easy vs Ease vs Opportune

I've been mulling the differences among these three.

Easy

Easy is effortless, limpid, lazy. It's opposite is difficult, strenuous, arduous.

Between hard and easy, always pick the easy. Right? Well...

A lot of what we want to do in life may not lie along the easiest path. What if we want to see the world from yonder ridge? What if we want to visit a distant friend? What if we want to live afloat, and must therefore acquire a vessel and the skills to sail her?

Often, we choose what is not easy, and never look back.

But short term hard often becomes long term easy.

When I first started sailing - for the first year - I would precede each day's venture with a liquid while on the bucket. 

Leaving anchor, weaving through a fleet of moored boats, safely exiting harbor and returning, a day exposed to wind and weather I'd not yet learned to anticipate... the responsibility of it all. 

All these turned my bowels to water... not easy!

And then, one day sailing from harbor, I realized I'd surpassed my moment of gastric distress. Come to think of it, it had been a while. Without realizing it, what had been so frightening and hard - struggling to learn to walk the walk - was now... well...
 
Easy.


Ease

It's the verb I'm thinking of; to ease. To slide, flow, drift. Be in the moment. Centered. Calm. A stillness that has nothing to do with motion or it's lack.

One can ease one's way, I feel, regardless of whether or not the path is easy

When things are easy, of course, it's easy to ease one's way. But when it's hard - in the teeth of the gale or the anchor drags or even when there's just a few too many people around - one can still ease along.

Breathe, deep and regular. Relax muscles which have tensed to no purpose. Look ahead but don't worry about it. Attend to what's needful in this moment.

Ease your way out of trouble. Ease your way along.


Opportune

The Opportune Moment.

This is the moment we've all been waiting for! Making hay when the sun shines; strike while the iron is hot; take a stitch in time to save nine. Such sayings may sound trite, but carry a cargo of wisdom if we listen with open minds! There's a reason they've been repeated down the long years.

I mean, it's all well and good to choose a harder path on the road to heart's desire. But if we ignore the Opportune Moment, our efforts redouble. We may be thwarted, exhausted... our hearts denied.

The Opportune Moment is like a temporal, Ockham's Razor; a concept which winnows the possible moments of action down to the one that matters. That moment where the stars align; that cusp between hard and easy...

That moment to ease on down the road.